VxVM Disk Array Configuration Updates
22 VERITAS Volume Manager Hardware Notes
public: slice=4 offset=0 len=14417280 disk_offset=5112
private: slice=3 offset=1 len=2879 disk_offset=2556
update: time=976952456 seqno=0.88
ssb: actual_seqno=0.0
headers: 0 248
configs: count=1 len=2104
logs: count=1 len=318
Defined regions:
config priv 000017-000247[000231]: copy=01 offset=000000 enabled
config priv 000249-002121[001873]: copy=01 offset=000231 enabled
log priv 002122-002439[000318]: copy=01 offset=000000 enabled
Multipathing information:
numpaths: 2
c5t0d1s2 state=enabled
c6t0d1s2 state=enabled
IBM Enterprise Storage Server (ESS)
Minimum software driver and firmware levels for the JNI adapter are:
◆ FC64-1063 Software Driver: Minimum level is V2.3. Current level V2.4.1 is
recommended.
◆ FC64-1063 Firmware level: Minimum level 13.3.5, or above.
Required Solaris Operating System parameters (in file /etc/system) for JNI HBA are:
◆ set sd:sd_max_throttle = 24
◆ set sd:sd_io_time=0xf0
◆ set sd:sd_retry_count=10
Note For detailed information, please refer to the IBM ESS Host Attachment Guide.
This document can be found online at:
www.storage.ibm.com/hardsoft/products/ess/support/hostattach.pdf
Output examples include:
# vxdmpadm listctlr all
CTLR-NAME ENCLR-TYPE STATE ENCLR-NAME
=====================================================
c0 OTHER ENABLED others0
c3 IBM-SHARK ENABLED IBM_SHARK0
c4 IBM-SHARK DISABLED IBM_SHARK0
c0 SEAGATE ENABLED seagate0
# vxdmpadm getsubpaths ctlr=c4
hwnotes.book Page 22 Friday, January 23, 2004 1:22 PM
Comments to this Manuals