Shark DG-3530 Installation Guide download pdf (Page 30)

VxVM Disk Array Configuration Updates

20 VERITAS Volume Manager Hardware Notes

Multipathing information:

numpaths: 2

c5t11d12s2 state=enabled

c6t8d12s2 state=enabled

HP SureStore™ E Disk Array XP512

The minimum software driver and firmware levels for the JNI adapter are:

◆ FC64-1063 Software Driver: Minimum level is V2.3. Current level V2.4.1 is

recommended.

◆ FC64-1063 Firmware level: Minimum level 13.3.5, or above.

Note When using an XP512 array, and the array is attached through a JNI

HBA(FCI-1063), you should use the Solaris-Hitachi fca-pci package which can be

found at http://www.jni.com/Drivers. When you reach this page, you should

select FCI-1063 and then download and install the package,

SOLARIS_PCI_258HIT0701.tar

Output examples include:

# vxdmpadm listctlr all

CTLR-NAME ENCLR-TYPE STATE ENCLR-NAME

==================================================================

c0 SEAGATE ENABLED seagate0

c2 SEAGATE ENABLED seagate0

c5 XP512 ENABLED xp5120

c6 XP512 ENABLED xp5120

# vxdmpadm getsubpaths ctlr=c5

NAME STATE PATH-TYPE(M) DMPNODENAME ENCLR-TYPE ENCLR-NAME ATTRS

============================================================================

c5t0d0s2 ENABLED - c5t0d0s2 XP512 xp5120 -

c5t0d1s2 ENABLED - c5t0d1s2 XP512 xp5120 -

c5t0d2s2 ENABLED - c5t0d2s2 XP512 xp5120 -

c5t0d3s2 ENABLED - c5t0d3s2 XP512 xp5120 -

c5t0d4s2 ENABLED - c5t0d4s2 XP512 xp5120 -

c5t0d5s2 ENABLED - c5t0d5s2 XP512 xp5120 -

c5t0d6s2 ENABLED - c5t0d6s2 XP512 xp5120 -

c5t0d7s2 ENABLED - c5t0d7s2 XP512 xp5120 -

c5t0d9s2 ENABLED - c5t0d9s2 XP512 xp5120 -

c5t0d10s2 ENABLED - c5t0d10s2 XP512 xp5120 -

c5t0d11s2 ENABLED - c5t0d11s2 XP512 xp5120 -

c5t0d12s2 ENABLED - c5t0d12s2 XP512 xp5120 -

c5t0d13s2 ENABLED - c5t0d13s2 XP512 xp5120 -

c5t0d14s2 ENABLED - c5t0d14s2 XP512 xp5120 -

c5t0d15s2 ENABLED - c5t0d15s2 XP512 xp5120 -

hwnotes.book Page 20 Friday, January 23, 2004 1:22 PM

Shark DG-3530 Installation Guide Page 30