Shark S3251 Use and Care Manual download pdf (Page 16)

TOLL FREE: 1-800-798-7398

Trouble Shooting

PROBLEM POSSIBLE REASONS & SOLUTIONS

The Light & Easy™

Steam Mop will

not turn-on.

Your steam-mop should be securely plugged into an

electrical outlet.

Check your fuse or breaker.

If your unit still does not work, call 1-800-798-7398.

Light & Easy™

Steam Mop

will not

make steam.

Is there water in the water tank? If not, add water to your

steam mop following instructions on page 5.

Light & Easy™

Steam Mop

leaves

water on the ﬂoor.

Is your micro-ﬁber cleaning pad too wet? Unplug your

steam mop and change the micro-ﬁber cleaning pad.

Light & Easy™

Steam Mop

left

white spot on

the ﬂoor.

Do not leave your steam-mop on the ﬂoor with a damp or

wet cleaning pad.

Do you have hard water? If you do, you might want to

switch to distilled water.

Make sure the water is securely on the water tank.

Floors are cloudy,

streaky or spotty

after steaming.

The pad might be dirty, change the pad.

If you washed the pocket with powder detergent, then the

pad may have residual detergent left on it. Wash it again

with liquid detergent.

If you are cleaning in a kitchen area where there might be a

build-up of grease, use a de-greasing agent such as an all-

purpose cleaner or dish soap and paper towels to clean the

area ﬁrst.

You might have left the mop in the same spot for too long.

Do you have hard water? If you do, you might want to

switch to distilled water.

This might be leftover from past cleaners used on the ﬂoor

surface. Use the steam mop a few more times and see if

the leftover cloudiness is removed.

Light & Easy™

Steam Mop

hard to push.

Make sure the steam pad is attached correctly.

Check to see if the cleaning pad is excessively dirty.

Replace if the pad is too dirty or wet.

1 ... 15 16 17 18 19 20

Comments to this Manuals

No comments

Shark S3251 Use and Care Manual Page 16

Comments to this Manuals

Related products and manuals for Steam cleaners Shark S3251