Shark NV350UKMS Specifications download pdf (Page 8)

HELP LINE: 0844 873 0728

TO ASSEMBLE:

1 Place the ﬂoor nozzle on a level surface.

2 Align the tube of the ﬂoor nozzle with the tube on

the detachable canister and lower until you hear

the two pieces click into place. (Fig. 7)

When attaching the motorized ﬂoor brush, ensure

that the latching mechanism is fully locked in place

to ensure electrical connection has been made.

NOTE: To change ﬂoor nozzles press the red

release button (a) on the side of the detachable

canister, gently hold the nozzle to the ﬂoor with

your foot and pull the detachable canister up.

(Fig. 8)

3 Attach the end of the extension wand to the tube

on the back of the detachable canister until it

clicks into place. (Fig. 9)

4 Slide the accessory holder (a) positioned opposite

the upper cord wrap, over the extension wand.

Align the tab with the groove and push down.

(Fig. 9)

5 Push the handle (b) onto the top of the extension

wand until you hear it click into place. (Fig. 10)

6 Insert the end of the stretch hose (c) into the

connector on the back of the detachable canister.

(Fig. 10)

7 Store the dusting brush (d) and the crevice tool

(e) on the mounts of the accessory holder.

(Fig. 10)

Mode 1: Upright Vac

To reduce the risk of electric shock, unplug the unit before assembling, adding or removing attachments or

converting modes.

WARNING: The On/Off switch is on the top of the detachable canister. Always ensure the power is OFF

(“O” position) before plugging and unplugging.

Fig. 7 Fig. 8

Fig. 9 Fig. 10

Upper

Cord

Storage

Wrap

NV350UKMS_26_IM_ENG_120906_1.indd 8 12-09-06 2:59 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

No comments

Shark NV350UKMS Specifications Page 8