Shark GS500 User's Guide download pdf (Page 5)

TOLL FREE: 1-800-798-7398

www.sharkclean.com

Englis h

IMPORTANT: Always make

sure the fabric steamer is

UNPLUGGED from the electrical

outlet when not in use. Never

ﬁll the water reservoir when the

unit is plugged in.

IMPORTANT: Always check

the fabric care labels for

recommendations. Test the

fabrics for colorfastness in an

inconspicuous place such as

an inside seam. Some articles

of clothing are better steamed

from the underside.

IMPORTANT: When

assembling your fabric steamer,

there may be a little water in

the water tank. This is because

we test all our fabric steamers

100% before you buy them, so

you get a quality Shark

Steam

product.

Getting Started

First things ﬁrst, you need to

know what’s in the box you

just opened:

a Fabric Steamer with small

steam bonnet attached

b Bristle Brush Frame

c Upholstery/Delicate Fabric

Frame

d Lint Brush Frame

e Upholstery Steam Bonnet

f Delicate Steam Bonnet

Assembly & use instructions:

1 Safely remove contents of the

Press & Refresh

™

Garment Care

System and lay them out on a

ﬂat surface to see that you have

all the components to complete

the assembly.

2 READ ALL INSTRUCTIONS

BEFORE USING YOUR PRESS

& REFRESH

™

GARMENT CARE

SYSTEM.

3 Only use water. To extend the

life of your Press & Refresh

™

Garment Care System, we

recommend using distilled

water if you live in an area with

hard tap water.

4 Do not add cleaning solutions,

scented perfumes, oils, or

any other chemicals to the

water used in this appliance

as this may damage the unit

or make it unsafe for use. Use

of any substances other than

manufacturer’s recommended

accessories will automatically

void your warranty.

Assembly of the Vertical Press Pad

The Press & Refresh

™

Garment Care System brings your fabrics back to life without a trip to

the dry cleaners! Shark

Steam Technology provides continuous powerful vertical steam that deeply

penetrates fabrics and renews ﬁbers.

The Wrinkle Eraser

™

heat bar simulates the soleplate of an iron and presses the fabric for a crisp

ﬁnish. Press the Wrinkle Eraser

™

directly onto the garment for a crisp ﬁnish. Hold the steam trigger for

continuous steam.

Not only great on garments, the Press & Refresh

™

can be used anywhere around the home:

upholstery, bedding, curtains and more!

The vertical press pad makes garment care easy! Simply setup the pad onto any door, hang your

garment and Press & Refresh

™

2 The Vertical Press Pad comes

asembled with heat protection

panels in the pockets on the

back. These panels protect your

door from heat damage and

should be in place at all times

during use.

3 Slip the webbing bands at the

top of the vertical press pad

over either side of any door

with the terry cloth side facing

away from the door. With

the door open, loop the band

around the corner of the door

and repeat on the opposite

side. Gently tug on the pad

to make sure it is secure and

shut the door completely to

ensure the Vertical Press Pad is

stable for pressing. Be careful

not to close the door on your

ﬁngers. Adjust the straps on

the webbing to the appropriate

height for comfort (Fig. 3).

TIP: The straps can be adjusted

to ﬁt any door using the buckle

to adjust the strap lengths.

Assembling the vertical

press pad:

1 Insert the garment hook into

the top of the vertical press

pad (Fig. 1). Insert one of the

support rods into the opening

on the side of the Vertical

Press Pad making sure that it

is inserted ﬁrmly into the hook

(Fig. 2). Do the same with the

other support rod from the

other side.

g Vertical Press Pad

h Support Rods (x2)

i Garment Hook

j Heat Protection Panels (x8)

k Velcro

™

Clips (x3)

l Filling Flask

*Note: Model GS500W also includes

1 Accessory Bag, a 2 oz. bottle of Linen

Water and a 1 oz. Stain Stick.

Fig. 3Fig. 2

Fig. 1

*6 VHULHV ,% (6 LQGG 



 







  $0

1 2 3 4 5 6 7 8 9 10 ... 16 17

Comments to this Manuals

No comments

Shark GS500 User's Guide Page 5

Comments to this Manuals